Evaluation Board
|
BXW1300 Features |
|
|
Chipset |
CPU: IPQ4029 Quad-core ARM Cortex-A7 at 716.8 MHz |
|
System Memory |
256MB (supports up to 1GB) |
|
NOR Flash |
32MB |
|
NAND Flash |
256MB |
|
Wireless |
On-board 2x2 2.4GHz 802.11b/g/n, max 25dBm per chain, |
|
On-board 2x2 5GHz 802.11a/n/ac, max 24dBm per chain, |
|
|
2x U.FL connectors, diplexer allows dual band concurrent operation |
|
|
Frequency Range |
2412Mhz-2472Mhz and 4920Mhz-6100Mhz, simultaneous dual band |
|
2.4G:5mhz,10mhz,20mhz,40mhz |
|
|
5.8G:5mhz,10mhz,20mhz,40mhz,80mhz |
|
|
Modulation Techniques |
802.11b : DSSS (DBPSK / DQPSK / CCK) |
|
802.11a/g : OFDM (BPSK / QPSK / 16-QAM / 64-QAM) |
|
|
802.11ac/n : OFDM (BPSK / QPSK / 16-QAM / 64-QAM / 256-QAM) |
|
|
Power Consumption |
TBD |
|
Supported Operating System |
QCA Reference Firmware, OpenWRT v18.x |
|
Certification |
RoHS Compliance |
|
Environmental Temperature |
Operating : -20ºC to 70ºC , Storage : -40ºC to 90ºC |
|
Environmental |
Operating : 5% to 95% , Storage : Max. 90% |
|
Humidity, non-condensing |
|
|
Other Features |
Supports Dynamic Frequency Selection (DFS) |
|
BXW1300 interface |
|||
|
Interface name |
Interface hardware definition |
Interface function definition |
Explanation |
|
RJ45 Connector |
5 x 1000/100/10 ethernets |
|
|
|
POWER Connector |
DC 12V~17V |
|
|
|
UART-0 Connector |
2.54mm PIN*4
|
Debug with TTL Expand zigbee, and other serial devices |
Optional |
|
UART-1 Connector |
2.54mm PIN*4 |
Expand zigbee, and other serial devices |
Optional |
|
Type-C Connector |
Type-C To TTL |
Debug with USB |
|
|
PCIE Connector |
PCIE*2 USB2.0 bus USB3.0 bus |
4G modules Support cat1 cat4 cat6 |
Optional |
|
M.2 Connector |
M2*1 PCIE2.0 bus USB3.0 bus |
5G modules Support 5G Sub-6GHz |
Optional |
|
RGMII Connector |
|
Ethernet expansion board |
Optional |
|
LED Connector |
SYS*1 ERR*1 LAN*1 WiFi*1 4G*1 RSSI_1*1 RSSI_2*1 RSSI_3*1 |
GPIO control, which can be defined by software control function |
|
|
USB3 Connector |
USB2.0/USB3.0*1 |
|
|
|
RESET Connector |
Reset*1 |
Press and hold for 3 seconds to restore system factory settings |
|
1、Apply For Developer Account (bitswrt)
http://www.bitswrt.com/developers.html
2、Access BXW1300 FAE documentation
https://xxoo.sharepoint.com/sites/BXW1300/Shared%20Documents/FAE
Wireless video transmission Wi-Fi5 Wi-Fi 6 OEM ODM JDM
MU-MIMO AP CPE QSDK openwrt
@2014-2020 bitswrt Communication Technology Co., Ltd.