BXW1800

 

Hardware specifications

Chipset

CPU: IPQ6018 Quad-A53 1.8GHz

System Memory

1GB (supports up to 3GB) 16/32-bit

NOR Flash

32MB

NPU

One Twelve-Threaded network processing unit (NPU) Ubi32 @ 1.5 GHz

DSP

High performance Hexagon DSP with Vector Extensions @ 800-1GHz

Packet Acceleration

Packet Processing Engine (PPE) for standard 5-tuple routing/bridging of IPv4 and IPv6 packets with ingress capacity of 37.5M packet per second (Mpps) and egress capacity of up to 10 Mpps per port

WLAN interfaces

On-board 2x2 2.4GHz 802.11b/g/n, max 27dBm per chain

On-board 2x2 5GHz 802.11a/n/ac, max 25dBm per chain

2412Mhz-2472Mhz and 4920Mhz-6100Mhz, simultaneous dual band

2.4G:5mhz,10mhz,20mhz,40mhz

5.8G:5mhz,10mhz,20mhz,40mhz,80mhz

Maximum 5 GHz PHY rate: 1201 Mbps, TCP rate: 840 Mbps

Maximum 2.4 GHz PHY rate: 574 Mbps, TCP rate: 400 Mbps

5 GHz: SU-MIMO (2ss, 1 user), DL MU-MIMO (2ss, 2 users), ULMU-MIMO (STA mode only, 2ss,2 users), DL-OFDMA (8 users), UL-OFDMA (4 users)

2.4 GHz: SU-MIMO (2ss, 1 user), DL MU-MIMO (2ss, 2 users), ULMU-MIMO (STA mode only, 2ss,2 users), DL-OFDMA (8 users), UL-OFDMA (4 users)

Integrated Ethernet PHYs

5x GE

Operating Voltage

6V-16V

Power Consumption

TBD

Supported Operating System

OpenWRT v17.x  Kernel 4.4

Certification

RoHS Compliance

Environmental Temperature

Operating : -20ºC to 70ºC , Storage : -40ºC to 90ºC

Environmental Humidity, non-condensing

Operating : 5% to 95% , Storage : Max. 90%

Dimensions (W x D x H)

74*48mm

Other Features

Supports Secure boot.

Support for LDPC in both TX and RX for increased wireless coverage.

Supports Digital Pre-Distortion (DPD), which reduces power consumption and improves Band Edge performance.

 

 

 

BXW1800 interface

Interface name

Interface hardware definition

Interface function definition

Explanation

RJ45 Connector

5 x 1000/100/10 ethernets

 

 

POWER Connector

DC 12V~17V

 

 

UART-0 Connector

2.54mm PIN*4

 

Debug with TTL

Expand zigbee, and other serial devices

Optional

UART-1 Connector

2.54mm PIN*4

Expand zigbee, and other serial devices

Optional

Type-C Connector

Type-C To TTL

Debug with USB

 

PCIE Connector

PCIE*2

USB2.0 bus

USB3.0 bus

4G modules

Support cat1 cat4 cat6

Optional

M.2 Connector

M2*1

PCIE3.0 bus

USB3.0 bus

5G modules

Support 5G Sub-6GHz

Optional

USXGMII Connector

 

Ethernet expansion board

Optional

LED Connector

SYS*1

ERR*1

LAN*1

WiFi*1

4G*1

RSSI_1*1

RSSI_2*1

RSSI_3*1

GPIO control, which can be defined by software control function

 

USB3 Connector

USB2.0/USB3.0*1

 

 

RESET Connector

Reset*1

Press and hold for 3 seconds to restore system factory settings

 

 

 

 

Software debugging instructions

1Apply For Developer Account (bitswrt)

http://www.bitswrt.com/developers.html

 

2Access BXW1300 FAE documentation

https://xxoo.sharepoint.com/:f:/r/sites/BXW1800/Shared%20Documents/FAE

 

Wireless video transmission Wi-Fi5 Wi-Fi 6  OEM  ODM  JDM

MU-MIMO AP CPE   QSDK openwrt

CONTACT  bitswrt

@2014-2020 bitswrt Communication Technology Co., Ltd.