NHX5424 (WiFi7), NHX53X2 (WiFi7), NHX6018 (WiFi6), NHX5018 (WiFi6), NHX4019 (WiFi5)
ALL Wi-Fi SOM PIN TO PIN
2x2(2.4Ghz)+2x2(5Ghz)+2x2(6Ghz-7.125Ghz)
Product model: NHX53X2-V01-222 |
|
Hardware model: NHX53X2-V01 |
|
Chipset |
IPQ5332 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5322 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5312 Quad Core ARM Cortex-A53 at 1.1 GHz QCN6274 QCA8368 |
System Memory |
1GB (supports up to 3GB) 16/32-bit DDR4 at 2133 MT/s |
NOR Flash |
8MB |
NAND |
128MB (supports up to 1GB) |
EEPROM |
128 Kbits |
NPU |
One Twelve-Threaded network processing unit (NPU) Ubi32 @ 1.5 GHz |
WLAN interfaces |
On-board 2x2 2.4GHz 802.11b/g/n/ax/be, max 27dBm per chain |
On-board 2x2 5GHz 802.11a/n/ac/ax/be, max 26dBm per chain |
|
On-board 2x2 6GHz 802.11a/n/ac/ax/be, max 26dBm per chain |
|
2412Mhz-2484Mhz 5.150 GHz to 5.855 GHz 5.945 GHz to 7.125 GHz Simultaneous three-band work |
|
2.4G: 5mhz, 10mhz,20mhz,40mhz |
|
5G: 20mhz,40mhz,80mhz, 160mhz |
|
6G: 20mhz,40mhz,80mhz, 160mhz, 320mhz |
|
Maximum 6GHz PHY rate: 5764.8Mbps, TCP rate: |
|
Maximum 5GHz PHY rate: 2882Mbps, TCP rate: |
|
Maximum 2.4GHz PHY rate: 688.2Mbps, TCP rate: |
|
6 GHz: 37 user DL/UL OFDMA DL/UL MU-MIMO(AP+STA) |
|
5 GHz: 37 user DL/UL OFDMA DL/UL MU-MIMO(AP+STA) |
|
2.4 GHz: 4users DL/ULOFDMA DL/ULMU-MIMOSTA |
|
Integrated Ethernet PHYs |
4x 2.5GE 1x 10GE |
Operating Voltage |
6.5V-16V |
Power Consumption |
TBD |
Supported Operating System |
OpenWRT Kernel 5.4 |
Certification |
RoHS Compliance |
Environmental Temperature |
Operating : -40ºC to 70ºC , Storage : -40ºC to 90ºC |
Environmental Humidity, non-condensing |
Operating : 5% to 95% , Storage : Max. 90% |
Dimensions (W x D x H) |
74*48mm |
Other Features |
Supports Secure boot. |
Support for LDPC in both TX and RX for increased wireless coverage. |
|
Supports Digital Pre-Distortion (DPD), which reduces power consumption and improves Band Edge performance. |
|
LED |
1* POWER LED |
Expand Interface
|
N* GPIO |
1x 10Gbps USXGMII/SGMII+ |
|
1x2LPCIe3.0+1x1LPCIe3.0+1xUSB2.0 or 3x1LPCIe3.0+1xUSB2.0 or 1x2LPCIe3.0+1xUSB3.0 or 2x1LPCIe3.0+1xUSB3.0 |
|
N*I2S/TDM/ PDM |
|
N* UART |
|
N* PWM |
|
1*EMMC/SD/sdio |
|
1* USB3.0/USB2.0 |
2x2(2.4Ghz)+2x2(5Ghz)
Product model: NHX53X2-V02-220 |
|
Hardware model: NHX53X2-V02 |
|
Chipset |
IPQ5332 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5322 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5312 Quad Core ARM Cortex-A53 at 1.1 GHz QCN6412 QCA8368 |
System Memory |
1GB (supports up to 3GB) 16/32-bit DDR4 at 2133 MT/s |
NOR Flash |
8MB |
NAND |
128MB (supports up to 1GB) |
EEPROM |
128 Kbits |
NPU |
One Twelve-Threaded network processing unit (NPU) Ubi32 @ 1.5 GHz |
WLAN interfaces |
On-board 2x2 2.4GHz 802.11b/g/n/ax/be, max 27dBm per chain |
On-board 2x2 5Ghz 802.11a/n/ac/ax/be, max 26dBm per chain |
|
2412Mhz-2484Mhz 5.150 GHz to 5.855 GHz simultaneous dual band |
|
2.4G: 5mhz, 10mhz,20mhz,40mhz |
|
5G: 20mhz,40mhz,80mhz, 160mhz |
|
Maximum 5GHz PHY rate: 2882Mbps, TCP rate: |
|
Maximum 2.4GHz PHY rate: 688.2Mbps, TCP rate: |
|
5 GHz: 37 user DL/UL OFDMA DL/UL MU-MIMO(AP+STA) |
|
2.4 GHz: 4users DL/ULOFDMA DL/ULMU-MIMOSTA |
|
Integrated Ethernet PHYs |
4x 2.5GE 1x 10GE |
Operating Voltage |
6.5V-16V |
Power Consumption |
TBD |
Supported Operating System |
OpenWRT Kernel 5.4 |
Certification |
RoHS Compliance |
Environmental Temperature |
Operating : -40ºC to 70ºC , Storage : -40ºC to 90ºC |
Environmental Humidity, non-condensing |
Operating : 5% to 95% , Storage : Max. 90% |
Dimensions (W x D x H) |
74*48mm |
Other Features |
Supports Secure boot. |
Support for LDPC in both TX and RX for increased wireless coverage. |
|
Supports Digital Pre-Distortion (DPD), which reduces power consumption and improves Band Edge performance. |
|
LED |
1* POWER LED |
Expand Interface
|
N* GPIO |
1x 10Gbps USXGMII/SGMII+ |
|
1x2LPCIe3.0+1x1LPCIe3.0+1xUSB2.0 or 3x1LPCIe3.0+1xUSB2.0 or 1x2LPCIe3.0+1xUSB3.0 or 2x1LPCIe3.0+1xUSB3.0 |
|
N*I2S/TDM/ PDM |
|
N* UART |
|
N* PWM |
|
1*EMMC/SD/sdio |
|
1* USB3.0/USB2.0 |
2x2(2.4Ghz)+4x4(5Ghz)
Product model: NHX53X2-V01-240 |
|
Hardware model: NHX53X2-V01 |
|
Chipset |
IPQ5332 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5322 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5312 Quad Core ARM Cortex-A53 at 1.1 GHz QCN6274 QCA8368 |
System Memory |
1GB (supports up to 3GB) 16/32-bit DDR4 at 2133 MT/s |
NOR Flash |
8MB |
NAND |
128MB (supports up to 1GB) |
EEPROM |
128 Kbits |
NPU |
One Twelve-Threaded network processing unit (NPU) Ubi32 @ 1.5 GHz |
WLAN interfaces |
On-board 2x2 2.4GHz 802.11b/g/n/ax/be, max 27dBm per chain |
On-board 4x4 5Ghz/6Ghz-7.125Ghz 802.11a/n/ac/ax/be, max 26dBm per chain |
|
2412Mhz-2484Mhz 5.150 GHz to 5.855 GHz simultaneous dual band |
|
2.4G: 5mhz, 10mhz,20mhz,40mhz |
|
5G: 20mhz,40mhz,80mhz, 160mhz, 320-80MHz |
|
Maximum 5GHz PHY rate: 5,765 Mbps for 4s/160 2,882 Mbps for 4s/80 1,376 Mbps for 4s/40
688 Mbps for 4s/20 TCP rate: |
|
Maximum 2.4 GHz PHY rate: 688.2Mbps, TCP rate: |
|
5 GHz: 37 user DL/UL OFDMA DL/UL MU-MIMO(AP+STA) |
|
2.4 GHz: 4users DL/ULOFDMA DL/ULMU-MIMOSTA |
|
Integrated Ethernet PHYs |
4x 2.5GE 1x 10GE |
Operating Voltage |
6.5V-16V |
Power Consumption |
TBD |
Supported Operating System |
OpenWRT Kernel 5.4 |
Certification |
RoHS Compliance |
Environmental Temperature |
Operating : -40ºC to 70ºC , Storage : -40ºC to 90ºC |
Environmental Humidity, non-condensing |
Operating : 5% to 95% , Storage : Max. 90% |
Dimensions (W x D x H) |
74*48mm |
Other Features |
Supports Secure boot. |
Support for LDPC in both TX and RX for increased wireless coverage. |
|
Supports Digital Pre-Distortion (DPD), which reduces power consumption and improves Band Edge performance. |
|
LED |
1* POWER LED |
Expand Interface
|
N* GPIO |
1x 10Gbps USXGMII/SGMII+ |
|
1x2LPCIe3.0+1x1LPCIe3.0+1xUSB2.0 or 3x1LPCIe3.0+1xUSB2.0 or 1x2LPCIe3.0+1xUSB3.0 or 2x1LPCIe3.0+1xUSB3.0 |
|
N*I2S/TDM/ PDM |
|
N* UART |
|
N* PWM |
|
1*EMMC/SD/sdio |
|
1* USB3.0/USB2.0 |
2x2(2.4Ghz)+4x4(5-7Ghz)
Product model: NHX53X2-V03-244 |
|
Hardware model: NHX53X2-V03 |
|
Chipset |
IPQ5332 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5322 Quad Core ARM Cortex-A53 at 1.5 GHz IPQ5312 Quad Core ARM Cortex-A53 at 1.1 GHz QCN6274 QCA8368 |
System Memory |
1GB (supports up to 3GB) 16/32-bit DDR4 at 2133 MT/s |
NOR Flash |
8MB |
NAND |
128MB (supports up to 1GB) |
EEPROM |
128 Kbits |
NPU |
One Twelve-Threaded network processing unit (NPU) Ubi32 @ 1.5 GHz |
WLAN interfaces |
On-board 2x2 2.4GHz 802.11b/g/n/ax/be, max 27dBm per chain |
On-board 4x4 5Ghz/6Ghz-7.125Ghz 802.11a/n/ac/ax/be, max 26dBm per chain |
|
2412Mhz-2484Mhz 5.150 GHz to 5.855 GHz 5.945 GHz to 7.125 GHz simultaneous dual band |
|
2.4G: 5mhz, 10mhz,20mhz,40mhz |
|
5-7G: 20mhz,40mhz,80mhz, 160mhz, |
|
Maximum 5-7GHz PHY rate: 11,530 Mbps for 4s/320 8,647 Mbps for 4s/320-80 5,765 Mbps for 4s/160 2,882 Mbps for 4s/80 1,376 Mbps for 4s/40
688 Mbps for 4s/20 TCP rate: |
|
Maximum 2.4 GHz PHY rate: 688.2Mbps, TCP rate: |
|
5-7GHz: 37 user DL/UL OFDMA DL/UL MU-MIMO(AP+STA) |
|
2.4 GHz: 4users DL/ULOFDMA DL/ULMU-MIMOSTA |
|
Integrated Ethernet PHYs |
4x 2.5GE 1x 10GE |
Operating Voltage |
6.5V-16V |
Power Consumption |
TBD |
Supported Operating System |
OpenWRT Kernel 5.4 |
Certification |
RoHS Compliance |
Environmental Temperature |
Operating : -40ºC to 70ºC , Storage : -40ºC to 90ºC |
Environmental Humidity, non-condensing |
Operating : 5% to 95% , Storage : Max. 90% |
Dimensions (W x D x H) |
74*48mm |
Other Features |
Supports Secure boot. |
Support for LDPC in both TX and RX for increased wireless coverage. |
|
Supports Digital Pre-Distortion (DPD), which reduces power consumption and improves Band Edge performance. |
|
LED |
1* POWER LED |
Expand Interface
|
N* GPIO |
1x 10Gbps USXGMII/SGMII+ |
|
1x2LPCIe3.0+1x1LPCIe3.0+1xUSB2.0 or 3x1LPCIe3.0+1xUSB2.0 or 1x2LPCIe3.0+1xUSB3.0 or 2x1LPCIe3.0+1xUSB3.0 |
|
N*I2S/TDM/ PDM |
|
N* UART |
|
N* PWM |
|
1*EMMC/SD/sdio |
|
1* USB3.0/USB2.0 |
Wireless video transmission Wi-Fi 5 Wi-Fi 6 Wi-Fi 6E Wi-Fi 7 OEM ODM JDM
MU-MIMO AP CPE QSDK openwrt
@2014-2024 bitswrt Communication Technology Co., Ltd.